Boiler Supplier

We can see from the above equation, it must be reduced in order to achieve fuel savings Q3 loss of incomplete combustion, and heat loss due to heat q4 q5. Among them, heat losses q5 that is where the greatest energy loss, and most have a recycling value. To make full use of the energy produced by combustion of the fuel, it is necessary to minimize the exhaust gas temperature. However, reducing the exhaust gas temperature in the actual operation of the boiler will produce such a large amount of condensed water, causing corrosion to the boiler thereby shortening the life of the boiler.

4, intelligent control

PLC programmable controller boiler system design autonomous, more laminated to the dynamic changes of the boiler, the boiler checked by running a real-time dynamic monitoring boiler pressure, level, temperature, long-term security to maintain the boiler.

Burns Hospital Affiliated Hospital of Shanxi Linfen Linfen Steel is attending a hospital burns burns and other diseases. Hot water boiler is essential hospital equipment heat, hot water output can provide disinfection of medical instruments and ward heating demand. With constantly improving our environmental policy, boiler correspondingly introduced more sophisticated Use. Linfen hospital burns to respond positively to the national environmental policy, decided to introduce an environmentally friendly low nitrogen gas hot water boiler. Taking into account the special circumstances of the hospital, the boiler should also have the use of safe, clean overall characteristics. Based on the above considerations, finalize the Linfen hospital with burns boiler party cooperation fast, fast is provided by one side of a gas condensing pressure hot water boiler (CWNS2.1-95 / 70-Y.Q).

Matters before the gas boiler should be noted

1, gas steam boiler before ignition must conduct a comprehensive examination, including the burner and related accessories and pipes are complete good, the operation is flexible. Before the water is not required to close the drain valve, open a safety valve, allowing air furnace can be discharged. After all the examination was normal, boiler before ignition Sheung Shui, Sheung Shui to drum should be the normal water level, turn on any air, flue baffle. Start the blower, the flue of the furnace and vent purge, purge time is not less than 30 seconds, and then start the ignition burner.

2, the treated water injected into the gas boiler, the water temperature should not exceed 40 ℃, when the pot water level reaches the lowest level, i.e. the inlet valve closed, to observe whether the water level is lowered. After firing the pot should always pay attention to the water level, the water level will rise as a result of exceeding the maximum safe water level can be heated sewage.