Boiler Supplier

Phenomenon gas steam boiler is filled with water and solutions 1. fault is filled with water steam boiler failure a. Above the water line of the license, or can not see the water level, the water level gauge glass (plate) dark color. B. All aqueous phases were color water level gauge indication color. c. high-water alarm signals low water level alarm occurs. D. superheated steam temperature decreased. E. feedwater flow is abnormally greater than the steam flow. F. water in a large number of sub-cylinder, severe trap operation. g. severe steam with a large amount of water, increased salinity, water hammer occurs in the sound of the steam pipe, connecting the outer flanges take dripping. 2. The process boiler filled with water flushing water table, determined to be minor or serious full of water full of water. Method: Close water table, the water pipe connected cock, then open drain cocks As can be seen from the decreased water level, indicating a slight full of water, the water supply is stopped, the drain valve open, put to the normal water level. Such as severe filled with water, to take urgent measures to find the cause of the shutdown.

The 12 bars hot water boiler spain for power plant can provide a large amount of high pressure hot water, wet steam and superheated steam, but it can achieve a pressure of only 32 bar. Under today's technical conditions, the hot water temperature can reach 240 ° C, and the steam flow can reach 45 t / h. From the current popular point of view, the use of fast steam boilers to provide wet steam is the most ideal solution: compared to the wet steam provided by the former (relative humidity 2% to 3%), the relative humidity of the wet steam provided by the fast steam boiler is only 0.5%, which reduces the risk of steam condensation in the steam line and has very good heat transfer performance when used.

Talk about safety rules steam boiler steam boiler is a gas often in special equipment working under high temperature conditions, improper operation will have a risk of explosion. To ensure their safety, economic operation, specially formulated the following procedure: First, the duty must strictly observe labor discipline, not AWOL, not doing things unrelated to the unit during operation, and strictly enforce the rules must not illegal operation, and strictly drunk and sick to work. Second, keep an eye on the water level and pressure changes, so that combustion stability, stable water level, steam pressure stable. Is strictly prohibited water, full of water and overpressure run accident occurs. Once the severe water shortage in the boiler found that the boiler water is strictly prohibited! Third, the periodic flushing water pressure gauges, which remains clean and bright, easy to observe. Automatic water level control, over-pressure protection device and alarm device chain, must always be sensitive and reliable in the state, found that the problem should be repaired in time. Fourth, the valve should have regular manual test (once a month, a day shift within a month, the operation should gently pull handle with care) and vapor dynamic test (per quarter) for a day shift) to maintain its sensitive and reliable. V. earnestly implement sewage system and operating requirements, to reduce the level of emissions per 25 ~ 30mm is appropriate, should run at a high pressure, low load. Sixth, the duty should be carried out inspection tours in the boiler, in order to grasp soon safety accessories and a boiler ancillary equipment (such as economizers, pumps, motors, valves, etc.) can not be found safe operation of boiler feed water to the boiler or other threatening when running situation, should immediately stop running. Seven, water quality testing staff often get in contact, water quality control, water quality strict implementation of national industry standards, strengthen water quality management, to avoid the knot raw scale and corrosion inside the drum. Eight, careful operation, outside the fireman on duty personnel at any other person shall tamper with the console press the knob in the boiler and valves, instrumentation, etc., fill out the log boiler.

For more than two decades, it has been the focus on clean boilers, the insistence on precision and wisdom, and the pursuit of exquisite craftsmanship that have made today's Fangkuai boilers. Fangkui Boiler will always be based on the boiler industry, and will return customer support and trust with brilliant results and sophisticated technology.